MODI Fixture and A2 Pro installation Guide

Step 1

Assemble the MODI Fixture

Position the vertical tube on the up-right base. Place the computer base into the vertical tube. Fasten all parts with the screws provided.

Step 2

Assemble the Albert 2 Pro scanner

Unbox your scanner and install the four Albert 2 camera towers

Step 3

Install the USB cable lock

Remove the adhesive tape from the base and align it with the USB ports. Plug in your USB cables, place the cable spacer, and tighten with the thumb screw.

Step 4

Connect Albert 2 Pro to your MODI fixture

Remove the two screws from the back of the fixture to open the computer box. Run the white wire and black extension cord down the fixture tube. Install your PC into the computer box opening. Connect the computer power cord to the black extension cord. Connect both Albert 2 Pro USB cables provided to the computer and connect them to the scanner.

Step 5

Connect your WIFI

Locate the WIFI symbol in the bottom right hand corner of your screen and select the network you would like to connect to.

Step 6

Activate your Albert scanner software

Turn on your PC first and then your Albert 2 Pro Scanner. Locate the Albert icon on your PC and press and hold the icon to launch the software.

Close X

Item Cannot Be Removed

The Albert Audio and Cleaning Kits is a required add-on and cannot be removed from your cart.