Welcome to Aetrex

Step 1

Assemble the G2 Fixture and connect the computer

Use the keys taped to the front of the display to open the G2 Fixture and install the computer into the opening. 

Step 2

Assemble the Albert 2 Pro Scanner

Unbox your scanner and install the four Albert 2 Pro camera towers.

Step 3

Install the USB cable lock

Remove the adhesive tape from the base and align it with the USB ports. Plug in the USB cables, place the cable spacer, and tighten with the thumb screw. 

Step 4

Connect the Albert 2 Pro Scanner to your G2 fixture

Connect the power cable and both USB cables to the scanner. Turn on the PC first and then the Albert 2 Pro Scanner. 

Step 5

Connect your WIFI

Locate the WIFI symbol in the bottom right hand corner of the screen and select the network you would like to connect to.

Step 6

Activate the Albert Scanner software

Turn on the computer first and then the Albert 2 Pro Scanner. Locate the Albert icon on the computer and press and hold the icon to launch the software.