G2 Fixture and A2 Pro installation Guide

Video Thumbnail

Step 1

Assemble the G2 Fixture and connect your computer

Use the keys taped to the front to open your G2 Fixture and install your PC into the opening. 

Video Thumbnail

Step 2

Assemble the Albert 2 Pro scanner

Unbox your scanner and install the four Albert 2 camera towers.

Video Thumbnail

Step 3

Install the USB cable lock

Remove the adhesive tape from the base and align it with the USB ports. Plug in your USB cables, place the cable spacer, and tighten with the thumb screw. 

Video Thumbnail

Step 4

Connect Albert 2 Pro to your G2 fixture

Connect the power cable and both USB cables to your scanner. Turn on your PC first and then your Albert 2 Pro Scanner. 

Video Thumbnail

Step 5

Connect your WIFI

Locate the WIFI symbol in the bottom right hand corner of your screen and select the network you would like to connect to.

Video Thumbnail

Step 6

Activate your Albert scanner software

Turn on your PC first and then your Albert 2 Pro Scanner. Locate the Albert icon on your PC and press and hold the icon to launch the software.

Close X

Item Cannot Be Removed

The Albert Audio and Cleaning Kits is a required add-on and cannot be removed from your cart.