MODI Fixture and Albert 2 Pro Installation Guide

Video Thumbnail

Step 1

Assemble the MODI Fixture

Position the vertical tube on the up-right base. Place the computer base into the vertical tube. Fasten all parts with the screws provided.

Video Thumbnail

Step 2

Assemble the Albert 2 Pro Scanner

Unbox the scanner and install the four Albert 2 Pro camera towers

Video Thumbnail

Step 3

Install the USB cable lock

Remove the adhesive tape from the base and align it with the USB ports. Plug in the USB cables, place the cable spacer, and tighten with the thumb screw.

Video Thumbnail

Step 4

Connect the Albert 2 Pro Scanner to the MODI fixture

Remove the two screws from the back of the fixture to open the computer box. Run the white wire and black extension cord down the fixture tube. Install the computer into the computer box opening. Connect the computer power cord to the black extension cord. Connect both Albert 2 Pro USB cables provided to the computer and connect them to the scanner.

Video Thumbnail

Step 5

Connect your WIFI

Locate the WIFI symbol in the bottom right hand corner of the screen and select the network you would like to connect to.

Video Thumbnail

Step 6

Activate your Albert Scanner software

Turn on the computer first and then your Albert 2 Pro Scanner. Locate the Albert icon on the computer and press and hold the icon to launch the software.